How much is life alert systems for seniors? The answer is from $30 to $1,000. There is no uniform standard answer, it depends mainly on our budget and demand.
Overview of life alert systems product
With the increasing trend of population aging, the demand for home care of the elderly is increasing. The elderly fall detection system can detect the movement status of the elderly at any time. When the status changes, it will send out an alarm signal through GSM/GPRS to notify children or designated persons such as hospitals, communities, relatives, neighbors, etc. in time. The product is small, exquisite, and easy to carry, and it is an intimate companion for the life of the elderly.
People who use the human body fall device: Ø Elderly people living alone; people with senile diseases; people with limited mobility; people who need special care Ø Interconnection of elderly care platforms such as hospitals, communities, nursing homes, etc. Ø Automatic alarm for emergencies such as sentry, security, etc.
Automatic alarm function for accidental fall After the elderly wearing, this product accidentally fell, the alarm will start to alert [Prompt Tone 1], and the alert lasts for 20 seconds. When no one touches [Active/Release Alarm], the product sends out an alarm message via GSM or GPRS. Go to the mobile phone of the designated guardian. At the same time, the alarm prompt sound changes to emergency alarm sound [prompt sound 2], and the alarm continues until the alarm sound stops after the artificial touch [active/deactivate alarm].
Active alarm function in emergencies In any state after the product is powered on, the user touches the [Active/Release Alarm] button for 3 seconds, and the product alarm prompt sounds [Prompt Tone 1] for 20 seconds. When no one touches the [Active/Release Alarm] button, the product sends out an alarm message, and the alarm sound changes to an emergency alarm sound [Prompt sound 2] at the same time.
Manually confirm the alarm function When the product emergency alarm sound [prompt sound 2] sounds, the user confirms the alarm by touching the [active/removing alarm] button. At this time, the emergency alarm sound of the product is turned off [Prompt sound 2]; this function applies to both automatic and active alarms.
Manually cancel the alarm function When the product alarm sound [Prompt Tone 1] sounds, the user can release the alarm by touching the [Active/Release Alarm] button. At this time, the product will cancel the “alarm message” sending, and the product alarm prompt sound [prompt sound 1] will be turned off; this function applies to both automatic and active alarms.
Battery level reminder function The red indicator on the surface of the product is a battery indicator. When the battery is fully charged, the red light is off; when the battery is low, the product’s red indicator light flashes slowly and needs to be charged immediately; when the battery is exhausted, the product’s red indicator light flashes quickly, at this time, the sensor will turn off all functions.
Network signal prompt function The green indicator on the surface of the product indicates the network status. When the green indicator light flashes quickly, it means that the product has not found a network signal. At this time, the product cannot send out an alarm message. When the indicator light flashes slowly, it means that the fall has been registered to the GSM network; in addition, when there is data transmission between the falling device and the GSM network, the indicator light will flash frequently.
Instructions for use of life alarm system
Working hours Under normal circumstances, the standby time of the product is not less than 120 hours.
How to use the charger First, plug one end of the charger into the charging jack of the fall, and then connect the other end of the charger to the mains socket. The indicator light on the charger is red, indicating that the battery is being charged; the indicator light turns green, indicating that the battery is fully charged. Note: After the battery is fully charged, do not continue charging for a long time. Otherwise, the battery life will be reduced.
Install the SIM card Use your thumb to press firmly in the direction of the arrow to open the lid on the back of the product. Use your thumb to forcefully follow the direction indicated by the OPEN arrow on the SIM card holder to unlock the SIM card holder; then lift the cardholder upwards; install the SIM card on the SIM cardholder. Finally, lock the SIM card holder and buckle the back cover of the fall.
Precautions: 1) Only use mobile phone cards of GSM network, CDMA cards cannot be used. 2) It is better to enable the caller ID function on the mobile phone card, otherwise functions such as phone number filtering cannot be realized. 3) The phone card cannot be set with a power-on password, otherwise, it will not be able to log in to the GSM network successfully. 4) It is necessary to ensure that this mobile phone card has a certain fund balance, which is used to pay for the expenses incurred when sending text messages. 5) Before using the mobile phone card, it should be put into the mobile phone to set up the service number of the short message center. The service number of the short message center is different from place to place, you can ask the local operator for details.
Set and modify the mobile phone number of the designated person (currently six people can be set) The setting and modification of the mobile phone number of the designated person in the product are sent to the product in the form of edit command SMS (set the mobile phone number as 1381111XXXX2)
Command SMS format
Four, product specifications
Overall dimensions (unit: mm) 54.5×76×21
Product appearance Product front Product side
Product accessories 1) Charger 2) Manual
For more life alert systems seniors articles, please read the following articles: